340лв. с ДДС. Издаване на данъчни фактури по желание на клиента.

Турбо с вграден гейт.
Perfect for all 4 or 6 CYL, 1.5L- 2.5L engines
Specification
Exhaust Inlet Turbo Manifold Flange T3 T4 4 bolt Flange Patterns
Exhaust Outlet Downpipe Flange: V-Band Flange
Bearing: Journal Bearing
Cooling Type: Oil Cooled
Wastegate: Internal Wastegate
Thrust Bearings 270 Degrees
Compressor Trim 48.1
Compressor AR 0.5
Compressor Inducer 52.7mm
Compressor Exducer 76mm
Turbine Trim 74.2
Turbine AR 0.63
Turbine Inducer 64.8mm
Turbine Exducer 55.8mm
Compressor outlet78 mm
Compressor inlet 51.5 mm
Turbine exhaust outlet 79mm
Turbine exhaust inlet44.7mmlength 85.8mm width
Hosepower Up to 420 HP
Condition Brand New
Package Size 29cm 27cm 24 cm
Package Weight 9160g

Product Material
1. Turbine housing Ductile iron QT450-10 - temperature resistant up to 700C
2. Steel turbine wheel K418 alloy high oxidation stability and resistance up to 900C
3. Compressor housing ZL104 aluminum with lightweight
4. Compressor wheel blades Cast aluminium blades superior air tightness & corrosion resistance
Product Performance
1. Cost-effective turbo increase 20-40% power for your car
2. Rich experience in turbo production and own factory
3. Quality assurance
4. High-speed oil seal ring
5. Strict quality inspection
6. Improve emissions and save oil
7. Built for durability and strength
All necessary gaskets included for ease of installation

Note
Professional Installation is Highly Recommended,Instruction is NOT Included
This is universal application turbo, so modification might be required for some vehicles
Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.

Notice
Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
Make sure the oil drain line is lower than the turbo itself.
Gasoline car must install a water cooling device to avoid overheating.
Ensure exhaust outlet are well sealed by welding.

Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3

Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3
This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability.
2. G3-min-Flow VNT Turbo Testing
The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo and verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.
3. Advanced Actuator Tester Programmer
Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also allows to modify operation range of the actuator arm, that includes changing open and close positions of the working angle.