Продавам осцилоскоп Tektronix MSO 4104B. Без забележки. Има си предния капак и върви с 4 сонди P6139A.
Ако разглеждаш тази обява то тогава знаеш колко реално струва този осцилоскоп.

The MSO/DPO4000B Series offers a robust set of features to speed every stage of debugging your design – from quickly discovering an anomaly and capturing it, to searching your waveform record for the event and analyzing its characteristics and the behavior of your device.

With the MSO/DPO4000B Mixed Signal Oscilloscope Series, you can analyze up to 20 analog and digital signals with a single instrument to quickly find and diagnose problems in complex designs. Bandwidths up to 1 GHz and a minimum of 5X oversampling on all channels ensure you have the performance you need to see fast-changing signal details. To capture long windows of signal activity while maintaining fine timing resolution, the MSO/DPO4000B Series offers a deep record length of 20M points standard on all channels.

The MSO4000B Series Mixed Signal Oscilloscopes provide 16 digital channels. These channels are tightly integrated into the oscilloscope user interface, simplifying operation and making it possible to solve mixed-signal issues easily.

With Wave Inspector® controls for rapid waveform navigation, automated serial and parallel bus analysis, limit and mask testing, and automated power analysis – the MSO/DPO4000B Oscilloscope Series from Tektronix provides the feature-rich tools you need to simplify and speed debug of your complex design.

1 GHz, 500 MHz, 350 MHz Bandwidth Models
4 Analog Channel Models
16 Digital Channels
Up to 5 GS/s Sample Rate on All Channels
20 Megapoint Record Length on All Channels
>50,000 wfm/s Maximum Waveform Capture Rate
Standard Passive Voltage Probes with Less than 4 pF Capacitive Loading and 500 MHz or 1 GHz Analog Bandwidth
Suite of Advanced Triggers
Automated Triggering, Decode, and Search on Parallel Buses
Per-channel Threshold Settings
Multichannel Setup and Hold Triggering
MagniVu™ High-speed Acquisition Provides 60.6 ps Fine Timing Resolution on Digital Channels
Wave Inspector® Controls provide Easy Navigation and Automated Search of Waveform Data
41 Automated Measurements, Waveform Histograms, and FFT Analysis for Simplified Waveform Analysis
TekVPI® Probe Interface supports Active, Differential, and Current Probes for Automatic Scaling and Units
10.4 inches (264 mm) Bright XGA Color Display
Small Footprint and Lightweight – Only 5.8 inches (147 mm) deep and 11 lb (5 kg)
Two USB 2.0 Host Ports on the Front Panel and Two on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard
USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge®-compatible Printer
Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
Optional Automated Serial Triggering, Decode, and Search Options for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM

MSO4104B characteristics:

Vertical system analog channels
Input channels: 4
Analog bandwidth: 1 GHz
alculated rise time (typical): 350 ps
Hardware bandwidth limits: 20 MHz or 250 MHz
Input coupling: AC, DC
Imput impedance: 1 MΩ ±1%, 50 Ω ±1%
Vertical resolution: 8 bits (11 bits with Hi Res)
Maximum input voltage, 1 MΩ: 300 Vrms CAT II with peaks ≤ ±425 V
Maximum input voltage, 50 Ω: 5 Vrms with peaks ±20 V

Horizontal system analog channels
Maximum sample rate (all channels): 5 GS/s
Maximum record length (all channels): 20 Mpoints
Maximum duration at highest sample rate (all channels): 4 ms
Time base range: 1 ns to 1000 s
Channel-to-channel deskew range: ±125 ns

Vertical system digital channels
Input channels: 16 digital
Thresholds: Per-channel thresholds
Threshold selections: TTL, CMOS, ECL, PECL, User defined
User-defined threshold range: ±40 V
Maximum input voltage: ±42 Vpeak
Input dynamic range: 30 Vp-p ≤200 MHz, 10 Vp-p >200 MHz
Minimum voltage swing: 400 mV
Input impedance: 100 kΩ
Probe loading: 3 pF
Vertical resolution: 1 bit

Horizontal system digital channels
Maximum sample rate (main): 500 MS/s (2 ns resolution)
Maximum record length (main): 20M points
Minimum detectable pulse width (typical): 1 ns
Channel-to-channel skew (typical): 200 ps

Trigger system
Main trigger modes: Auto, Normal, and Single
Trigger coupling: DC, AC, HF reject (attenuates >50 kHz), LF reject (attenuates 50 kHz), noise reject (reduces sensitivity)
Trigger holdoff range: 20 ns to 8 s

Trigger level range
Any channel: ±8 divisions from center of screen
External (auxiliary input): ±8 V
Line: Fixed at about 50% of line voltage

Trigger modes: Edge, Sequence (B-trigger), Pulse Width, Timeout, Runt, Logic, Setup and Hold, Rise/Fall Time, Video, Parallel
Optional trigger modes: Extended Video, I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, I2S/LJ/RJ/TDM

Acquisition modes
Sample: Acquire sampled values
Peak Detect: Captures glitches as narrow as 800 ps (1 GHz models) or 1.6 ns (500 MHz and 350 MHz models) at all sweep speeds
Averaging: From 2 to 512 waveforms included in average
Envelope: Min-Max envelope reflecting Peak Detect data over multiple acquisitions
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div
Waveform measurements: Cursors, 29 automatic measurements, statistics measurements, reference levels, gating, waveform histogram
Waveform math: Arithmetic, integrate, differentiate, FFT, advanced algebraic expressions
Options: Power measurements, limit/mask testing

Display:
Display Type: 10.4 inch (264 mm) liquid-crystal TFT color display
Display Resolution: 1,024 horizontal × 768 vertical pixels (XGA)
Waveform Styles: Vectors, Dots, Variable Persistence, Infinite Persistence
Graticules: Full, Grid, Solid, Cross Hair, Frame, IRE, and mV
Format: YT and simultaneous XY/YT
Waveform Capture Rate: >50,000 wfm/s maximum

Input/output ports:
USB 2.0 High-speed Host Port: Supports USB mass storage devices, printers and keyboard. Two ports on front and two ports on rear of instrument
USB 2.0 Device Port: Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and direct printing to all PictBridge-compatible printers
LAN Port: RJ-45 connector, supports 10/100/1000 Mb/s
XGA Video Port: DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector
Auxiliary Input: Front-panel BNC connector. Input Impedance 1 MΩ. Max input 300 Vrms CAT II with peaks ≤ ±425 V
Probe Compensator Output: Front-panel pins. Amplitude: 2.5 V. Frequency: 1 kHz
Auxiliary Out: Rear-panel BNC connector. Vout (Hi): ≥2.5 V open circuit, ≥1.0 V 50 Ω to ground. Vout (Lo): ≤0.7 V into a load of ≤4 mA; ≤0.25 V 50 Ω to ground. Output can be configured to provide a pulse out signal when the oscilloscope triggers, the internal oscilloscope reference clock out, or an event out for limit/mask testing
External Reference In: Time-base system can phase lock to an external 10 MHz reference (10 MHz ±1%)
Kensington Lock: Rear-panel security slot connects to standard Kensington lock
VESA Mount: Standard (MIS-D 100) 100 mm VESA mounting points on rear of instrument

Lan eXtensions for Instrumentation (LXI): LXI Class C, V1.3